Kohler CV742 Problems

Troubleshooting 3 Common Kohler CV742 Problems

Kohler CV742 is a 4-cycle, gasoline-powered engine in a V-twin configuration. It powers several equipments- from agricultural machines like a tractor to industrial ones like truck loaders to RVs. However, this peak performer also faces some common problems that render its users in great trouble.

So, what are the Kohler CV742 problems? Well, the most common problems arise when the engine crank but won’t start, or it doesn’t crank or hard starting.

In this article, we will be discussing the most common Kohler Command Pro CV 742 engine issues and their fixes. So, let’s launch our journey here!

Kohler CV742 Problems and Our Solutions In Details

Below is a brief summary of the problems with the Kohler CV742 and their best possible solutions.

Engine Crank But Won’t StartReplace the faulty ignition coil according to the manufacturer’s instructions
Pull the ignition wire off a spark plug to check for specific coil defects
Engine Will Not CrankCharge the battery or replace it if it’s old or damaged
Hard StartingClean or replace the air filter  
Replace the faulty spark plug
Repair or replace the fuel system

Now, let’s elaborate on the issues one by one with their possible solutions.

1. Engine Crank But won’t Start

A common issue of Kohler CV742 is the engine cranks but won’t start or the engine bogs down repeatedly. This could happen for several causes. However, in CV742, it is commonly due to the intermittent ignition coil. Don’t worry! You can diagnose and fix it easily.

To quickly check this issue, pull the ignition wire off a spark plug and notice this-

  • Doesn’t make a difference in the sound of the engine means the specific coil that supplies that plug is damaged
  • Engine stalls when you pull away that same wire off the spark plug. It indicates the coil feeding other sparks is defective


  • Replace the ignition coil: If the ignition coil is faulty, it should be replaced.
  • Remove the old ignition coil and install the new one according to the manufacturer’s instructions.
  • Make sure all connections are clean, tight, and free of corrosion.

2. Engine Will Not Crank

Then, if you are unlucky enough, your engine may not crank at all. Several causes may lie behind this issue. Such as discharged battery due to or faulty electric starter or solenoid.

If the battery is not charging correctly, it can become drained and fail to start the engine. Here’s how to check the charging system in a Kohler CV742.


To fix a dead battery-

  • Charge the battery: If the battery is not completely dead, you can try charging it with a battery charger.
  • Jump-start the engine: If the battery is completely dead, you can jump-start the engine using jumper cables and another vehicle with a charged battery.

Connect the positive (+) and negative (-) cables to the respective battery terminals of both vehicles and start the engine of the other vehicle. Let it run for a few minutes and then try to start your engine.

  • Replace the battery: If the battery is old or damaged, it may need to be replaced. Check the battery voltage with a voltmeter to determine if it is holding a charge. If the voltage is low or the battery is damaged, it should be replaced.
  • Check the alternator: If the battery is not charging even after replacing it, the alternator may not be functioning correctly. Check the alternator output with a voltmeter and replace it if necessary.

3. Hard Starting

Hard starting can be caused by a clogged air filter, faulty spark plug, malfunctioning fuel system, or other factors. This can cause reduced power output and difficulty starting the engine.

The symptoms are straightforward. You may have difficulty starting the engine, and the engine may run rough or stall.


To fix the hard starting, you should clean or replace the air filter, replace the faulty spark plug, and repair or replace the fuel system.

Final Words

The KOHLER CV742 engine is a reliable and durable engine used in a variety of outdoor power equipment. However, if you face any issues like engine crank but wont start or hard starting, approach it promptly as we said.

Follow all safety precautions before starting any work on your engine. You can get information about precautions in their owner’s manual.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top