cub cadet electric power steering problems

5 Cub Cadet Electric Power Steering Problems With Solutions!

The power steering controls the movement of the cub cadet. But like other components of mowers, the electric power steering faces some common problems.

So, what are the common problems of Cub Cadet power steering? The most common problems include vibration of the steering when starting the engine or pressing the brake. Also, a stiff or loosened steering wheel can create a lot of difficulties while working. Changing the position of the arm and wheels can also cause accidents.

That’s not the end. We have discussed the problems and the solutions in this article. Read on to learn more about the issues and their possible remedies.

Cub Cadet Electric Power Steerings ProblemsOur Guide to Proper Fix

The most common problems and the solutions of cub cadet electric power steering are given below:

The steering wheel shakes when the engine startsAlign the tire and rims correctly
Hard to handle the power steeringFlush dirty oil and replace the oil filter, fill the reservoir, and seal the leakage
Stiff steering wheelRefill oil if needed, replace the worn-out steering bushing, and clean the joints
Steering wheels are too loosenThe steering and wheel joint point, and steering gear should be tightened, if the bearing is cracked then change it
Mismanagement of the armsTighten the arms into the correct position

Let’s break down the problems of Cub Cadet Electric power steering. The solutions are also given here.

1. The Steering Wheel Shakes When the Engine Starts

Shaking, and vibration mainly occurs while starting the engine and less commonly while braking. It mainly occurs when you are driving a long way on an uneven surface.

It results in an unbalanced alignment of wheels. Also, it can be caused due to damaged rims and dirt in the rims. Also, less air pressure in the tires or a damaged tire can shake the cub cadet while starting it.


  • Inspect the wheels
  • Check the alignment of the wheel. If you find any loose parts, then tighten the part
  • If you find any damaged rim, then repair or replace it
  • Clean the rims
  • If you find any damaged tire or less air pressure in the tire then replace it

That’s how the vibration will disappear.

2. Hard to Handle the Power Steering

You may sometimes face a condition where you have to work harder to move the power steering and also produce noise.

That usually occurs when there is a low level of fluid, or the fluid is dirty. Also, if the fluid filter fails to work, then it could also be the reason. Fluid filter often fails if it is not changed for a long time or a lot of dirt accumulates.


  • Check the oil. If it is dirty, flush it and fill it up to the maximum level
  • If the oil level is low, then fill the reservoir with the oil regarding the level mentioned in the user manual
  • Replace the oil filter if it is not working
  • Finally, start the engine. Look underneath and find if any leakage is present. If present, then seal it

To avoid this problem, check the oil level and leakage regularly.

3. Stiff Steering Wheels

The steering wheels get stiff, and you have to pressure them more to turn. This problem also results when there is a lack of fluid and more dust in the connecting portion of the arm and shaft. A damaged steering bushing can also hamper turning the steering wheels smoothly.


To make the steering wheels moveable, you need to

  • Check the oil level and refill if needed
  • Clean the dust from the connecting and turning points like the connection between the shaft and arm
  • Replace the damaged steering bushing

Maintenance and regular cleanliness can reduce these types of problems.

4. Steering Wheels Are Too Loosen

After using your cub cadet several times, the steering wheels may turn a lot with a slow force. This occurs when the steering gear is loose or wheel bearings have a crack. Also, the joint between the steering and wheel can get loosened and result in this.


  • Replace the wheel bearing if any crack is present or damaged
  • Place the steering gear and tighten the screws
  • Tighten the connecting point of the steering and wheel

Use your cub cadet delicately for long-lasting longevity.

5. Mismanagement Of The Arms

This is a rare case. This problem mainly arises after the long use of the cub cadet. You will find that the steering wheels are not in the correct position.

Due to heavy use, the arms slightly change their position to the right or left, resulting in the incorrect position of the steering wheels.


To fix the arms-

  • Remove all the bolts carefully from both the right and left arm
  • Reset the position of the arms where they are supposed to be
  • Screw all the bolts

You should take help from professionals if you face difficulties while fixing problems. It is better not to fix it by yourself if you have no experience.


Having a cub cadet and not facing problems with steering is almost impossible. So, you should not take steering-related problems lightly, as they can create unwanted situations while mowing.

Fixing the problems by yourself will save you money. But without any experience, you should not fix it by yourself. Wrong fixing can create a more dangerous situation than no fixing.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top